Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Bumper Opel Astra J

Model: Vauxhall Astra Astra J - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Rear bumper

See other generations:
Video tutorial

In this guide, you will see how to remove the rear bumper from an Opel Astra J Station Wagon by following these instructions. First, open the boot and lift the plastic side cover; then unscrew the internal screw and extract the rear light.

At this point, perform the same operation for the other light and then remove the torx screws found on both sides of the wheel arches; now start unclipping the bumper from the sides and finish unscrewing the plastic clips located under the bumper. Finally, remove it as shown in the video!


Updated on 31 March 2026 by ScegliAuto


Related tutorials

Removing the Rear Bumper from an Opel Astra
Removing the Rear Bumper from an Opel Astra
Vauxhall Astra (2004-2010 / Astra H) The following instructions will guide you on how to remove and replace the rear bumper of an Opel Astra in simple steps. First, open the rear tailgat…
Removing Rear Bumper on Opel Astra H
Removing Rear Bumper on Opel Astra H
Vauxhall Astra (2004-2010 / Astra H) In this video tutorial, you will learn how to remove the rear bumper on an Opel Astra H in simple steps. First, open the boot and then open the side …
How to Remove the Rear Bumper on an Opel Astra H
How to Remove the Rear Bumper on an Opel Astra H
Vauxhall Astra (2004-2010 / Astra H) In this tutorial video, see how to remove the rear bumper on an Opel Astra H, following the instructions below. First, open the boot and start by uns…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos