Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper on an Opel Astra H

Model: Vauxhall Astra Astra H - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Rear bumper

See other generations:
Video tutorial

In this tutorial video, see how to remove the rear bumper on an Opel Astra H, following the instructions below. First, open the boot and start by unscrewing the fastening screws found on both sides of the wheel arches; then detach the bumper from the sides as shown in the video.

Now, fully detach it by gently prying at the sides; then disconnect the various cables found at the back of the bumper. Finally, reassemble everything, applying the reverse procedure of disassembly!


Updated on 26 April 2026 by ScegliAuto


Related tutorials

Removing the Rear Bumper from an Opel Astra
Removing the Rear Bumper from an Opel Astra
Vauxhall Astra (2004-2010 / Astra H) The following instructions will guide you on how to remove and replace the rear bumper of an Opel Astra in simple steps. First, open the rear tailgat…
Removing the Rear Bumper on an Opel Astra Sw (J)
Removing the Rear Bumper on an Opel Astra Sw (J)
Vauxhall Astra (2009-2016 / Astra J) In this video, we will see how to remove the rear bumper on an Opel Astra J, in station wagon version. First, open the boot lid and start by unscrewi…
Removing Rear Bumper on Opel Astra H
Removing Rear Bumper on Opel Astra H
Vauxhall Astra (2004-2010 / Astra H) .. In this video tutorial, you will learn how to remove the rear bumper on an Opel Astra H in simple steps. First, open the boot and then open.. …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos