Do it yourself
| ||||
|
Vauxhall Tigra - Video tutorial
Model: Vauxhall Tigra
MK 2
- Years 2003-2009 Lift the hood and put on the special support rod. Unscrew the bolts located in the upper part of the front bumper, so as to be able to extract it slightly from its seat. This is to create more workspace, which will remain very little anyway. Unscrew the bolts that secure the headlight at the top, then go to the lower part of the bumper and remove the screw indicated in the video. Now access the wheel arch and remove the bolt that secures it, so that you can move it and unscrew those that secure the headlight at the bottom. Finally you can take out the light and replace the bulbs.
Posted on 21 January 2024 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.040
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |