Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on an Opel Mokka

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Tire pressure warning light

This guide shows how to reset the tyre pressure warning light on the Opel Mokka. The first step is to turn on the ignition and, using the "Menu" button, scroll to the vehicle tab. Using the dial located at the top of the left steering column, scroll to the tyre pressure page. By pressing the confirmation button at the top of the same lever, the tyre pressure reset menu will be displayed. Wait for the reset operation to complete. At this point, check the tyre pressure before hitting the road.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?
How to Reset the Tyre Pressure Warning Light on the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) To reset the tyre pressure warning light on the Opel Mokka, open the driver's door and check the recommended inflation pressure values on the sticker…
How to Reset the Tyre Pressure Warning Light on an Opel Mokka?
How to Reset the Tyre Pressure Warning Light on an Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) To reset the tyre pressure warning light on an Opel Mokka, first inflate all tyres to the recommended pressure values, which are listed on the sticke…
Resetting the Tyre Pressure Warning Light on the Opel Mokka
Resetting the Tyre Pressure Warning Light on the Opel Mokka
Vauxhall Mokka (2020-2026 / Mokka B) Quickly and easily reset the tyre pressure monitoring system (TPMS) warning light on the Opel Mokka. Before resetting, ensure all four tyres are at t…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos