Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bulbs on the Opel Mokka?

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Tail light bulb

If you need to replace all the bulbs in the rear light cluster of the Opel Mokka, you must remove the entire light unit. This is an easy operation, but you need to use a socket spanner rather than a standard one. In the boot, remove the small cover that hides the screw of the side pocket, which will be removed along with the bottom panel. The light unit is held in place by four 8 mm bolts; remove them with the socket spanner. On the outer edge of the compartment, there is another small cover that hides another screw, which must also be removed. At this point, you can pull the light unit out of its housing and proceed to replace the bulbs.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear light and bulbs of the Opel Mokka
Replacement of the rear light and bulbs of the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today's instructions will show us how to disassemble and replace the rear taillight and its bulbs of the Opel Mokka. First, we open the rear hatch of…
How to replace the rear headlight bulbs of the Opel Mokka
How to replace the rear headlight bulbs of the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today's guide will show us how to disassemble and replace the rear headlight bulbs of the Opel Mokka, following the instructions below. First, we ope…
How to Replace the Rear Light Bulbs on the Opel Mokka
How to Replace the Rear Light Bulbs on the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) In this brief guide, we will go through the steps to remove and replace the rear light bulbs on the Opel Mokka. First, open the rear boot lid and sta…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos