Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on the Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light bulb

See other generations:
Video tutorial

In this brief guide, we will go through the steps to remove and replace the rear light bulbs on the Opel Mokka. First, open the rear boot lid and start removing the plastic cover found on the side of the boot, just behind the light; then disconnect the electrical connector for the bulbs by unscrewing the screws of the light to remove it from the outside, as shown in the video.

At this point, pull the connectors along with the bulbs, replacing any faulty bulbs with new ones; then reassemble everything!


Updated on 26 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulbs on an Opel Mokka
How to Replace the Rear Light Bulbs on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today's guide will show you how to remove and replace the rear light bulbs on an Opel Mokka, following the instructions below. First, open the boot l…
Replacing the Rear Light and Bulbs on the Opel Mokka
Replacing the Rear Light and Bulbs on the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today's instructions will show you how to remove and replace the rear light and its bulbs on the Opel Mokka. First, open the boot lid and start remov…
How to Replace the Front Headlight Bulbs on an Opel Mokka
How to Replace the Front Headlight Bulbs on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Let’s see how to replace the front headlight bulbs on an Opel Mokka. Open the bonnet by pulling the lever located at the bottom right of the dashboar…

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos