Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Access the Rear Bulbs on an Opel Mokka?

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Light bulb

See other generations:
Video tutorial

In the video provided, see how to access the rear bulbs of an Opel Mokka to check, replace, or simply clean the electrical connectors if they are oxidised. First, open the boot by lifting the rear hatch and remove any covering present on the side of the lamp you intend to work on. Now, extract the two plastic panels exactly as shown in the video.

The first panel can be pulled off by hand, while for the second, you may need to use a flat screwdriver or the car keys. Now you can work on the bulbs.


Updated on 5 July 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulbs on the Opel Mokka
How to Replace the Rear Light Bulbs on the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) In this brief guide, we will go through the steps to remove and replace the rear light bulbs on the Opel Mokka. First, open the rear boot lid and sta…
How to Replace the Rear Light Bulbs on an Opel Mokka
How to Replace the Rear Light Bulbs on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today's guide will show you how to remove and replace the rear light bulbs on an Opel Mokka, following the instructions below. First, open the boot l…
Replacing the Rear Light and Bulbs on the Opel Mokka
Replacing the Rear Light and Bulbs on the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today's instructions will show you how to remove and replace the rear light and its bulbs on the Opel Mokka. First, open the boot lid and start remov…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos