Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Timing Belt on an Opel Corsa C

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Timing belt

To replace the timing belt on your Opel Corsa, you need to open the bonnet and remove the front wheel on the driver's side. In the video, the vehicle is lifted on a ramp, but you can lift it just enough to work underneath. Now remove the splash guard from the wheel arch and pull the tensioner pulley that holds the belt tight with a 15mm spanner; at this point, you can remove the belt. Naturally, since you are doing this operation, it is advisable to check the condition of the tensioner pulley and the idler pulley, as if they need replacing, this is the right time to do it. Now install the new belt, which costs around £12 on major e-commerce platforms. Follow the video to ensure it follows the correct path, and make sure it is well tensioned using the tensioner pulley. Now you can reattach the splash guard, and take the opportunity to clean the brake disc with a suitable cleaner. Refit the wheel. The job is done.

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Corsa (2019-2026 / Corsa F) Today, discover the main steps that will guide you on how to remove and replace the timing belt of the Opel Corsa 1.2. First, raise the vehicle and s…
Vauxhall Corsa (2000-2006 / Corsa C) To replace the timing belt on an Opel Corsa, open the bonnet to access the components located on the left side of the engine bay. You will also need …
Vauxhall Corsa (2000-2006 / Corsa C) Today's main information will show us the process of disassembling and replacing the timing belt of the Opel Corsa. First, we lift the car and start …

Other guides you may be interested in

    Frequently Asked Questions

    • Corsa 2019-2026 - How much does the timing chain cost and how often should it be changed on an Opel Corsa in the UK? Read answer
    • Corsa 2006-2014 - Opel Corsa timing chain replacement price? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos