Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Replacing the Front Headlamp Bulb

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Headlight bulb

This video illustrates the steps to remove and replace the front headlamp bulb of your car. Once you have the correct replacement part, you can proceed with the installation. First, remove the cover that closes the light compartment; once the cover is removed, disconnect the various wires supplying power to the bulb. After this operation, remove the metal tab holding the bulb and take it out. Finally, once the old bulb is removed, install the new one immediately and check if it works correctly.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Headlamp Bulb
Replacing the Rear Headlamp Bulb
Vauxhall Corsa (2000-2006 / Corsa C) To replace the rear headlamp bulb, you must first remove the headlamp itself: open the rear bonnet, unscrew the fixing screws of the headlamp located…
How to Replace the Headlamp Bulb on an Opel Corsa
How to Replace the Headlamp Bulb on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Replace the blown bulbs inside the headlamp of an Opel Corsa. Open the front bonnet by pulling the lever located at the bottom right of the dashboard…
Replacement of Rear Headlamp Bulb
Replacement of Rear Headlamp Bulb
Vauxhall Corsa (2000-2006 / Corsa C) To replace the rear headlamp bulb, you need to remove the headlamp itself: open the boot and unscrew the fixing screws of the headlamp located along …

How to Replace the Number Plate Bulb on Citroen C3

To replace the number plate bulb on a Citroen C3, use a screwdriver or plastic lever to remove the light cover (plastic housing) located in the rear bumper of the car. Once the light cover is removed, extract the bulb holder (using your hands), then disconnect the bulb from it. Fit the new LED bulb (same size and voltage) into the holder, then refit the light cover into the tailgate metal by pressing until the clips lock automatically. Test the correct operation of the previously installed bulb.

Watch the video!


by ScegliAuto

More videos