Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rear Headlamp Bulb

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Tail light bulb

To replace the rear headlamp bulb, you need to remove the headlamp itself: open the boot and unscrew the fixing screws of the headlamp located along the closure line of the boot; once the headlamp is detached from its housing, disconnect the power connector, unscrew the screws that secure the bulb holder to the headlamp, and separate the two elements; at this point, extract the old bulb and insert the new one (bayonet fitting).
Reassemble the two elements, connect the plug, check the correct operation of the bulbs, and secure the headlamp to the bodywork.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the bulb of a rear headlight of an Opel Corsa
How to replace the bulb of a rear headlight of an Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) In the video in question, you can see the steps to follow to replace the bulb of a rear headlight of an Opel Corsa car. Open the trunk of the car and…
How to replace the rear headlight bulb of the Opel Corsa
How to replace the rear headlight bulb of the Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) To replace the rear headlight bulb of the Opel Corsa, we must first open the trunk and unscrew the two screws of the headlight; once the screws are r…
How to replace the rear headlight bulb of an Opel Corsa?
How to replace the rear headlight bulb of an Opel Corsa?
Vauxhall Corsa (2014-2019 / Corsa E) To replace the rear headlight bulb of an Opel Corsa, start by opening the rear hatch. Find the access panel inside the trunk, usually located behind …

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos