Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of Rear Headlamp Bulb

Model: Vauxhall Corsa Corsa C - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Tail light bulb

See other generations:
Video tutorial

This video illustrates the procedures for removing and replacing the bulb of the rear headlamp on your car. First, remove the plastic cover of the headlamp from the car; unscrew all the various screws that secure it and carefully extract it, paying attention to the electrical connection.

Next, disconnect the electrical cable connector and remove the other three screws located inside the cover.

Once the screws are removed, take off the cover to access the bulb, remove the bayonet bulb by simply pulling it out, and replace it with a new bulb.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Replacement of Rear Headlamp Bulb
Replacement of Rear Headlamp Bulb
Vauxhall Corsa (2000-2006 / Corsa C) To replace the rear headlamp bulb, you need to remove the headlamp itself: open the boot and unscrew the fixing screws of the headlamp located along …
How to Replace the Rear Light Bulb of the Opel Corsa
How to Replace the Rear Light Bulb of the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Today, we will see how to replace the rear light bulb of the Opel Corsa, model D from 2011. To perform the operation, open the boot and remove the in…
How to replace the bulb of a rear headlight of an Opel Corsa
How to replace the bulb of a rear headlight of an Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) In the video in question, you can see the steps to follow to replace the bulb of a rear headlight of an Opel Corsa car. Open the trunk of the car and…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos