Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remote Closure of Front Windows

Model: Vauxhall Vectra Vectra B, MK 2 - Years 1995-2002
Part: Window switch

To enable the closure of the front windows when locking the doors with the remote key, a simple connection between two wires must be made. Remove the plastic trim located directly at the opening lever of the front bonnet: it is secured with two screws and two clips; once the cover is removed, free the wiring harness closest to the clutch lever by removing the insulating tape and intercept two brown wires, which will actually be one brown-black and one brown-red: create a bridge between these two wires.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlights of the Opel Vectra
How to replace the front headlights of the Opel Vectra
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) Briefly, we will see the steps that will allow us to disassemble and replace the front headlights of the Opel Vectra. First, we open the hood of our …
How to Know the Fuse Diagrams for an Opel Vauxhall
How to Know the Fuse Diagrams for an Opel Vauxhall
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) The first fuse panel of an Opel Vauxhall car is located inside the vehicle, exactly behind the side cover next to the instrument panel. This first pa…
Disassembly of the cooling radiator of the Opel Vectra
Disassembly of the cooling radiator of the Opel Vectra
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) Today's instructions will show us the main steps on how to disassemble and replace the engine cooling radiator of the Opel Vectra. First, we open the…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos