Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Vectra
    4. : How to replace the front headlights of the Opel Vectra

Vauxhall Vectra - Video tutorial

Model: Vauxhall Vectra MK 3, Vectra C - Years 2002-2008
Part: Headlight
Operation: How to replace the front headlights of the Opel Vectra

Briefly, we will see the steps that will allow us to disassemble and replace the front headlights of the Opel Vectra. First, we open the hood of our car and start removing the screws we find on the top of the front bumper and on both sides of the wheel arches; then we gently detach the bumper on the sides and unscrew all the fixing screws of the front headlight, as shown in the video. At this point, we disconnect the electrical connector of the lights to remove the optical group, replacing it with the new one; we apply the reverse process for reassembly!


Posted on 20 May 2024 by ScegliAuto



Where are the fuses located in the Opel Vectra?
Vauxhall Vectra (1995-2002 / MK 2, Vectra B) The fuses of the Opel Vectra are located inside the appropriate fuse boxes that are present in the vehicle: in this type of vehicle, two can be found
Where is the fuse box located in the Opel Vectra C?
Vauxhall Vectra (2002-2008 / MK 3, Vectra C) Locating the box containing all the various fuses of your Opel Vectra C is very simple, and with the following mini guide, you will be able to do it
How to replace Opel Vectra rearview mirror
Vauxhall Vectra (2002-2008 / MK 3, Vectra C) Is the exterior mirror mirror on the Opel Vectra broken? Let's replace it with a new one. With a lever with plastic coating we go to pry between the

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos