Do it yourself
| ||||
|
Vauxhall Vectra - Headlight
Vauxhall Vectra (2002-2008 / Vectrac, MK 3)
How to replace the front headlights of the Opel Vectra Briefly, we will see the steps that will allow us to disassemble and replace the front headlights of the Opel Vectra. First, we open the hood of our car and …read all… Posted on 20 May 2024 by ScegliAuto
Vauxhall Vectra (2002-2008 / Vectrac, MK 3)
How to replace the front headlight of the Opel Vectra The following information will show us how to disassemble and replace the front headlight of the Opel Vectra, in simple steps. First, we open the hood of the …read all… Posted on 29 March 2024 by ScegliAuto
Vauxhall Vectra (2002-2008 / Vectrac, MK 3)
How to replace the headlight of the Opel Vectra To replace the front light unit of the car it is necessary to proceed as follows: using a socket wrench, unscrew the fixing screws of the mudguard of the wheel …read all… Posted on 28 April 2024 by ScegliAuto Airbags (1) Shock absorbers (2) Air conditioning (2) Car stereo (2) Anti roll bar (1) Bushings (1) Spark plugs (1) Bodywork (2) Control unit (2) Timing belt (3) Checks and maintenance (4) Throttle body (1) Dashboard (1) Gearshift gaiter (2) Bearing (1) Brake discs (2) Headlight (3) Particulate filter (1) Air filter (3) Cabin air filter (2) Diesel filter (2) Oil filter (1) Clutch (2) Window lift switch (1) Accessory Kit (1) Light bulb (1) Headlight bulb (4) Rear light bulb (2) Dashboard light (1) Engine (2) Starter motor (2) Engine oil (1) Door panel (4) Front bumper (2) Brake pads (5) Gear Shift Knob (2) Fuel pump (7) Push button (2) Instrument cluster (3) Radiator (1) Passenger compartment heating radiator (4) Fuse box (5) Seat (1) Lock (1) Brake system (1) Suspensions (2) Outside rearview mirror (4) Windscreen wipers (1) Thermostat (2) EGR valve (2) Interior blower (2) Steering wheel (1) |
How to reset the service in the Opel Antara?As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |