Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Vectra
    4. : Windshield wipers

Vauxhall Vectra - Windshield wipers

Windshield Wipers Vauxhall Vectra (1995-2002 / vectra b, mk 2)

Vauxhall Vectra (1995-2002 / Vectrab, MK 2)
Check Windscreen Wiper Motor Functionality
Remove the protective cap from the nut securing the wiper arms; then unscrew the nuts and pull the arms off the drive pins: they may be stuck, and you might …Read all…
Posted on 8 February 2026 by ScegliAuto
Airbag (1) Shocks (2) Air conditioning (2) Car stereo (2) Anti-roll bar (1) Air vents (1) Bushings (1) Spark plugs (1) Body (2) Control unit (2) Key (1) Timing belt (4) Air conditioner (3) Onboard computer (2) Checks and maintenance (3) Throttle body (1) Dashboard (1) Shifter boot (2) Bearing (1) Brake rotors (2) Headlight (3) Diesel particulate filter (1) Air filter (3) Cabin air filter (3) Diesel fuel filter (4) Oil filter (1) Clutch (2) Window switch (1) Accessory kit (1) Light bulb (1) Headlight bulb (5) Tail light bulb (2) Instrument panel light (1) Engine (2) Starter motor (2) Engine oil (1) Clock (2) Door trim panel (4) Front bumper (2) Brake pads (5) Shift knob (2) Fuel pump (7) Push button (2) Instrument cluster (2) Radiator (2) Heater core (4) Fuse box (17) Seat (2) Door lock (1) Brake system (1) Suspension system (2) Side mirror (4) Warning light – error code (2) Tire pressure warning light (1) Service warning light (11) Windshield wipers (1) Thermostat (2) EGR valve (2) Blower motor (2) Steering wheel (1)

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos