Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Vauxhall
  4. :
  5. Vectra
  6. : Gear Shift Knob

Vauxhall Vectra - Gear Shift Knob

Vauxhall Vectra (2002-2008 / Vectrac, MK 3)
How do you replace the gear knob on the Opel Vectra?

In order to replace the gear knob on the Opel Vectra, you need to go and grab the knob and the relative leather gear gaiter underneath: in this way it will be …read all…
Posted on 28 December 2022 by ScegliAuto
Vauxhall Vectra (2002-2008 / Vectrac, MK 3)
Removing the Opel Vectra gear knob

If the gear knob is broken, let's see how to remove it, repair it or change it. We take the knob in our hands and rotate it to the left and right until it is …read all…
Posted on 29 November 2023 by ScegliAuto

Airbags (1) Shock absorbers (2) Air conditioning (2) Car stereo (2) Anti roll bar (1) Bushings (1) Spark plugs (1) Bodywork (2) Control unit (2) Timing belt (3) Checks and maintenance (4) Throttle body (1) Dashboard (1) Gearshift gaiter (2) Bearing (1) Brake discs (2) Headlight (3) Particulate filter (1) Air filter (3) Cabin air filter (2) Diesel filter (2) Oil filter (1) Clutch (2) Window lift switch (1) Accessory Kit (1) Light bulb (1) Headlight bulb (4) Rear light bulb (2) Dashboard light (1) Engine (2) Starter motor (2) Engine oil (1) Door panel (4) Front bumper (2) Brake pads (5) Gear Shift Knob (2) Fuel pump (7) Push button (2) Instrument cluster (3) Radiator (1) Passenger compartment heating radiator (4) Fuse box (5) Seat (1) Lock (1) Brake system (1) Suspensions (2) Outside rearview mirror (4) Windscreen wipers (1) Thermostat (2) EGR valve (2) Interior blower (2) Steering wheel (1)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos