Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Vectra
    4. : Car stereo

Vauxhall Vectra - Car stereo

Vauxhall Vectra (2002-2008 / Vectrac, MK 3)
How to disassemble the car radio on Opel Vectra
Replacing the car radio on an Opel Vectra, let's see how it's done. We use the original or aftermarket metal keys to disassemble the Ducato stereo. We remove …read all…
Posted on 6 December 2023 by ScegliAuto
Vauxhall Vectra (2002-2008 / Vectrac, MK 3)
Car radio disassembly instructions
The disassembly of the car radio is extremely simple as long as you have the appropriate extraction keys: it is a high-strength steel wire shaped like a "U" …read all…
Posted on 15 July 2023 by ScegliAuto
Airbags (1) Shock absorbers (2) Air conditioning (2) Car stereo (2) Anti roll bar (1) Bushings (1) Spark plugs (1) Bodywork (2) Control unit (2) Timing belt (3) Checks and maintenance (4) Throttle body (1) Dashboard (1) Gearshift gaiter (2) Bearing (1) Brake discs (2) Headlight (3) Particulate filter (1) Air filter (3) Cabin air filter (2) Diesel filter (2) Oil filter (1) Clutch (2) Window lift switch (1) Accessory Kit (1) Light bulb (1) Headlight bulb (4) Rear light bulb (2) Dashboard light (1) Engine (2) Starter motor (2) Engine oil (1) Door panel (4) Front bumper (2) Brake pads (5) Gear Shift Knob (2) Fuel pump (7) Push button (2) Instrument cluster (3) Radiator (1) Passenger compartment heating radiator (4) Fuse box (5) Seat (1) Lock (1) Brake system (1) Suspensions (2) Outside rearview mirror (4) Windscreen wipers (1) Thermostat (2) EGR valve (2) Interior blower (2) Steering wheel (1)

How to reset the service in the Opel Antara?

As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly.

Watch the video!


by ScegliAuto

More videos