Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Vauxhall
  4. :
  5. Vectra
  6. : Starter motor

Vauxhall Vectra - Starter motor

Vauxhall Vectra (2002-2008 / Vectrac, MK 3)
How do you replace the starter motor of the Opel Vectra?

In order to replace the starter motor of the Opel Vectra, you need to open the hood so that you can remove the plastic cover on the top of the engine block. …read all…
Posted on 13 August 2023 by ScegliAuto
Vauxhall Vectra (2002-2008 / Vectrac, MK 3)
Replace the starter motor on Opel Vectra

Removing the starter motor of the Opel Vectra? Let's see how it is disassembled in the guide. We disconnect the car battery power cables before disassembling …read all…
Posted on 13 December 2023 by ScegliAuto

Airbags (1) Shock absorbers (2) Air conditioning (2) Car stereo (2) Anti roll bar (1) Bushings (1) Spark plugs (1) Bodywork (2) Control unit (2) Timing belt (3) Checks and maintenance (4) Throttle body (1) Dashboard (1) Gearshift gaiter (2) Bearing (1) Brake discs (2) Headlight (3) Particulate filter (1) Air filter (3) Cabin air filter (2) Diesel filter (2) Oil filter (1) Clutch (2) Window lift switch (1) Accessory Kit (1) Light bulb (1) Headlight bulb (4) Rear light bulb (2) Dashboard light (1) Engine (2) Starter motor (2) Engine oil (1) Door panel (4) Front bumper (2) Brake pads (5) Gear Shift Knob (2) Fuel pump (7) Push button (2) Instrument cluster (3) Radiator (1) Passenger compartment heating radiator (4) Fuse box (5) Seat (1) Lock (1) Brake system (1) Suspensions (2) Outside rearview mirror (4) Windscreen wipers (1) Thermostat (2) EGR valve (2) Interior blower (2) Steering wheel (1)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos