Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Vectra
    4. : Interior blower

Vauxhall Vectra - Interior blower

Vauxhall Vectra (2002-2008 / Vectrac, MK 3)
Remove the Opel Vectra interior ventilation fan
Remove the Opel Vectra interior ventilation fan. With a lever, remove the plastic covering placed under the glove compartment. The passenger compartment …read all…
Posted on 25 November 2023 by ScegliAuto
Vauxhall Vectra (2002-2008 / Vectrac, MK 3)
Air vent repair instructions
In order to disassemble the air vent, first remove the side cap of the dashboard, then the piece of molding that covers the central strip of the dashboard; …read all…
Posted on 5 August 2023 by ScegliAuto
Airbags (1) Shock absorbers (2) Air conditioning (2) Car stereo (2) Anti roll bar (1) Bushings (1) Spark plugs (1) Bodywork (2) Control unit (2) Timing belt (3) Checks and maintenance (4) Throttle body (1) Dashboard (1) Gearshift gaiter (2) Bearing (1) Brake discs (2) Headlight (3) Particulate filter (1) Air filter (3) Cabin air filter (2) Diesel filter (2) Oil filter (1) Clutch (2) Window lift switch (1) Accessory Kit (1) Light bulb (1) Headlight bulb (4) Rear light bulb (2) Dashboard light (1) Engine (2) Starter motor (2) Engine oil (1) Door panel (4) Front bumper (2) Brake pads (5) Gear Shift Knob (2) Fuel pump (7) Push button (2) Instrument cluster (3) Radiator (1) Passenger compartment heating radiator (4) Fuse box (5) Seat (1) Lock (1) Brake system (1) Suspensions (2) Outside rearview mirror (4) Windscreen wipers (1) Thermostat (2) EGR valve (2) Interior blower (2) Steering wheel (1)

How to reset the service in the Opel Antara?

As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly.

Watch the video!


by ScegliAuto

More videos