Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Check Windscreen Wiper Motor Functionality

Model: Vauxhall Vectra Vectra B, MK 2 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Windshield wipers

See other generations:
Video tutorial

Remove the protective cap from the nut securing the wiper arms; then unscrew the nuts and pull the arms off the drive pins: they may be stuck, and you might need to lever them off (it is advisable to spray some penetrating oil). Unscrew the nuts at the base of the wiper drive pins, remove the plastic cover under the windscreen: at this point, you can see the wiper motor and the linkage connected to it; if you need to replace the motor, simply unscrew the relevant fixing pins.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Where are the fuses located in the Opel Vectra?
Where are the fuses located in the Opel Vectra?
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) The fuse boxes of the Opel Vectra serve to contain the fuses that regulate the operation of the devices installed on the vehicle: in this type of car…
Where are the fuses located on the Opel Vectra?
Where are the fuses located on the Opel Vectra?
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) The fuse boxes of the Opel Vectra contain the fuses that control the operation of devices within the vehicle: this model has three fuse boxes. The fi…
Where are the Fuses Located on the Opel Vectra?
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) The fuses on the Opel Vectra are located inside the designated fuse boxes within the vehicle: this model has three boxes containing the fuses. The fi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos