Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Corsa
    4. : Replacement of the rear shock absorbers of the Opel Corsa 1.2

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Suspensions
Operation: Replacement of the rear shock absorbers of the Opel Corsa 1.2

In today's video tutorial we will see how to remove and replace the rear suspension of the Opel Corsa, with 1.2 petrol engine. First we lift the car and remove the rear wheel; after which we unscrew the screws of the wheel arch, in order to remove it. At this point we are going to lift the support part of the suspension with a jack; unscrew the screws of the latter, located both at the bottom and at the top, to remove it and replace it with the new one, as shown in the video. Now let's carry out the same procedure for disassembling and replacing the other rear suspension!


Posted on 18 September 2022 by ScegliAuto



How to replace the front shock absorbers in the Opel Corsa?
Vauxhall Corsa (2014-2019 / Corsa E) In this tutorial we can see how to replace the front shock absorbers in the Opel Corsa. First of all we lift the front side of the vehicle, obviously
How to replace front shock absorbers on Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) In this video tutorial we can see how it is possible to replace the front shock absorbers on an Opel Corsa D by following a few simple steps; the fir
How to replace the rear shock absorber on the Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) As a first operation it will obviously be necessary to remove the wheel on the side where it will be necessary to replace it, therefore inevitably, y

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos