Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wing Mirror on an Opel Meriva

Model: Vauxhall Meriva Meriva A, MK 1 - Years 2003-2010

To replace the external wing mirror, first press down on the lower part of the mirror to tilt it and carefully insert a plastic lever at the top to detach the old mirror from its internal housing. Disconnect the wires for the automatic demisting and replace the mirror; for safety, clean the contacts of the demisting and spray some deoxidising fluid. Connect the two power wires for the automatic demisting to the new mirror, position the mirror near the adjustment mechanism, ensuring the two guide levers are correctly aligned. Press gently all around the mirror to secure it in place. Once finished, clean the mirror for a clear view.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the External Mirror on an Opel Meriva?
How to Replace the External Mirror on an Opel Meriva?
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) To replace the external mirror on an Opel Meriva, first remove the corresponding door panel. Once detached, disconnect the mirror connector from its …
How to Replace the External Wing Mirror on the Opel Meriva?
How to Replace the External Wing Mirror on the Opel Meriva?
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) To replace the external wing mirror on the Opel Meriva, lever off the cover at the rear using a tool. Once the cover is removed, loosen the underlyin…
How to Remove the Exterior Mirror of the Opel Meriva B
How to Remove the Exterior Mirror of the Opel Meriva B
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) The exterior rear-view mirror of the second generation Opel Meriva, known as B and available on the market since 2010, is mounted directly on the doo…

    Frequently Asked Questions

    • Meriva 2010-2017 - Where is the ECU located in the Opel Meriva B? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos