Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Movano
    4. : How to restart the Opel Movano in an emergency when the AdBlue warning light has reached zero.

Vauxhall Movano - Video tutorial

Model: Vauxhall Movano Movano B, MK 2 - Years 2010-2021
Part: Fuse box
Operation: How to restart the Opel Movano in an emergency when the AdBlue warning light has reached zero.

In this video we see how to start the Opel Movano in an emergency (and we emphasize "in an emergency"), but also the Renault Master, for which the same procedure applies. Unfortunately, it may happen that a commercial vehicle also needs to manage an emergency, so we consider it necessary to make this procedure known, even if we want to emphasize that in this way the cruise control will not work, we will not see the speed of the vehicle and it will not count the kilometers traveled, because we will have to remove the fuse related to the navigation accessories. This fuse is located in the box in the passenger compartment, between the steering wheel and the driver's door, and it is the brown one with % amperes that we see removing in the video. Set it aside and put it back in place as soon as you have refueled the additive.


Posted on 2 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Movano 2010-2021 - Where are the fuses located in the Opel Movano? Read Answer
    • Movano 2010-2021 - Where are the fuse boxes of the Opel Movano? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos