Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Movano
    4. : How to reset the AdBlue in the Opel Movano

Vauxhall Movano - Video tutorial

Model: Vauxhall Movano MK 3 - Years 2021-2024
Part: Checks and maintenance
Operation: How to reset the AdBlue in the Opel Movano

To reset the AdBlue system in the Opel Movano, follow these steps: Make sure the AdBlue level in the tank is adequate. If the level is low, fill it up to the recommended capacity. Start the car and wait for the AdBlue system to recognize the new level. This may take a few minutes. Look for the "Reset" or "OK" button on the dashboard or infotainment system. You may need to scroll through menus or screens to find it. Press and hold the "Reset" or "OK" button for a few seconds. You may need to confirm the operation through a message on the screen. Release the button and wait for the system to confirm that the reset has been successful. A message may appear on the screen or the AdBlue indicator may turn off.


Posted on 19 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos