Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Recommended Tyre Pressures Label on the Opel Vivaro MK2

Model: Vauxhall Vivaro MK 2 - Years 2014-2019
Part: Checks and maintenance

In this video, you can see where to find the sticker with the recommended tyre pressures for inflating the tyres on the Opel Vivaro MK2. This label is located on the driver’s door frame and will display the tyre pressures for both normal and fully loaded conditions. Depending on the market, the vehicle will show the pressures in Bar (for EU countries), in PSI (for Anglo-Saxon countries), and often also in kPa (kilopascal is the universal measure of pressure). The conversions are: 1 kPa equals 0.01 Bar and 0.145038 PSI; 1 Bar equals 14.5038 PSI and 100 kPa; 1 PSI equals 0.689476 Bar and 6.89476 kPa.

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Opel Vivaro located?
Where is the fuse box of the Opel Vivaro located?
Vauxhall Vivaro (2014-2019 / MK 2) The Opel Vivaro vehicles produced from 2014 to 2019 contain two fuse boxes inside. Today we will show you the location of fuse box number 2. The fuse…
How to adjust the tire pressure of the Opel Vivaro
How to adjust the tire pressure of the Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) To check the tire pressure of our Opel/Vauxhall Vivaro, first we need to find out the tire size, which is written on the side of the tire, then we ne…
Where Are the Fuses in the Opel Vivaro?
Where Are the Fuses in the Opel Vivaro?
Vauxhall Vivaro (2014-2019 / MK 2) The fuses in the Opel Vivaro are all contained within the dedicated and unique fuse box located inside the vehicle. This is positioned within the cab…

    Frequently Asked Questions

    • Vivaro 2014-2019 - Where is the inertia switch of the Opel Vivaro 2.5 cdtt? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos