Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the tire pressure of the Opel Vivaro

Model: Vauxhall Vivaro MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

To check the tire pressure of our Opel/Vauxhall Vivaro, first we need to find out the tire size, which is written on the side of the tire, then we need to open the left door, where there is a sticker indicating the recommended inflation pressures by the manufacturer: these pressures are usually indicated for the front and rear tires and are expressed in PSI (pounds per square inch) which is the measure used in Anglo-Saxon countries and in Bar (the measure used in EU countries).

We then measure the tire pressure and if any tire is lower, we must inflate it until it reaches the recommended pressure.

This is even more important in a work vehicle.


Posted on 16 November 2025 by ScegliAuto


Related tutorials

Where to Find the Tyre Pressure Indicators on an Opel Vivaro?
Where to Find the Tyre Pressure Indicators on an Opel Vivaro?
Vauxhall Vivaro (2014-2019 / MK 2) When the tyre pressure is not the same for all four tyres, the TPMS warning light illuminates on the display of the 2019 Opel Vivaro, alerting the dr…
Resetting the Tyre Pressure Warning Light of the Opel Vivaro
Resetting the Tyre Pressure Warning Light of the Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) The information in the video shows how to reset the tyre pressure warning light (TPMS) of the Opel Vivaro; before performing the reset, ensure all fo…
How to adjust the gearbox of the 2015 Opel Vivaro
How to adjust the gearbox of the 2015 Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) Today we will show you how to adjust the gear shift of the 2015 Opel Vivaro. To adjust the gear shift, you need to use a 10 mm wrench. Lift the plast…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos