|
Do it yourself
| |||
| ||||
Replacement of the dipped beam headlight bulb of the Opel Astra
Model: Vauxhall Astra
Astra H
- Years 2004-2010
When the headlight bulb of the Opel Astra's dipped beam burns out, we must replace it as soon as possible for our safety and to avoid fines. We rotate the wheel corresponding to the headlight that contains the bulb to be replaced, inside the wheel arch, near the headlight, we will find a flap locked by two clips, by acting on them we will release it. We will thus have access to the rubber protection of the headlight, once removed we will find the electrical connector of the bulb. By rotating it counterclockwise we can release the bulb and remove it, disconnect it from the connector and replace it with a new one, put it back in its seat locking it, put back the rubber protection and close the flap.
Posted on 21 May 2024 by ScegliAuto
Video tutorial
Related tutorials
Vauxhall Astra
(2004-2010 /
Astra H)
How to replace the front headlight bulbs on an Opel Astra. Open the inspection cover of the splash guard; locate the inspection cover of the headligh…
Vauxhall Astra
(2009-2016 /
Astra J)
Learn how to replace the front headlight bulbs on an Opel Astra: open the front bonnet by pulling the lever located at the bottom right of the dashbo…
Vauxhall Astra
(2009-2016 /
Astra J)
How to replace the front headlight bulbs on an Opel Astra. Open the front bonnet by pulling the lever located at the bottom right of the dashboard; s…
Other guides you may be interested in
|
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.243
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |