Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ossa Tr 80
Part:

To replace the flywheel of the Ossa TR 80, you need to loosen the screws that secure the side protective cover of the engine block: once this cover has been freed from the appropriate screws, it will be possible to locate the flywheel connected to the crankshaft in the area underneath. Once the flywheel has been located, it must be freed from the fastening screws so that the new replacement part can be inserted: this part must then be secured to the crankshaft with the appropriate screws, covering everything with the cover and checking for proper operation.

Posted on 14 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the clutch of the Ossa MAR 250?
How do you replace the clutch of the Ossa MAR 250?
Mar 250 To replace the clutch of the Ossa MAR 250, you will need to loosen the screws that secure the side cover panel of the engine block, under which you w…
How do you replace the crankshaft bearing of the Ossa MAR 250?
How do you replace the crankshaft bearing of the Ossa MAR 250?
Mar 250 In order to replace the crankshaft bearing of the Ossa MAR 250, it is necessary to completely disassemble the engine block, so that it is possible to…
How to Dismantle the Engine of the Ossa Phantom 125?
How to Dismantle the Engine of the Ossa Phantom 125?
Phantom 125 To dismantle the engine of the Ossa Phantom 125, loosen the bolts securing the engine block to its housing. This will allow you to loosen the bolts f…

Replacing the Headlight Bulb on the Yamaha Mio 125

This brief guide will show you how to remove and replace the headlight bulb on the Yamaha Mio 125 scooter in simple and quick steps. First, place the scooter on the centre stand and begin to remove the front headlight; to do this, unscrew the fastening screws located at the bottom and disconnect the electrical connector of the light found at the back, as illustrated in the video. At this point, remove and replace the bulb with a new one of the correct type and with the same fitting; finally, reassemble the front headlight with its front fairing!

Watch the video!


by ScegliAuto

More videos