Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ossa
    3. : Tr 280i
To install the starter system with lever on the Ossa TR 280i, you need to unscrew the screws that secure the front fairing of the handlebars and the upper part of the fuel tank. This will allow you to route the battery cables, connecting them appropriately to the lever that will be installed on the right side of the bike. Once the lever is connected to the cables, you will also need to connect these to the starter device, which must then be secured inside the front fairing of the handlebars; finally, reattach all previously removed fairings.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the crankshaft bearing of the Ossa MAR 250?
How do you replace the crankshaft bearing of the Ossa MAR 250?
Mar 250 In order to replace the crankshaft bearing of the Ossa MAR 250, it is necessary to completely disassemble the engine block, so that it is possible to…
How do you replace the flywheel of the Ossa TR 80?
How do you replace the flywheel of the Ossa TR 80?
Tr 80 To replace the flywheel of the Ossa TR 80, you need to loosen the screws that secure the side protective cover of the engine block: once this cover h…
How to Dismantle the Engine of the Ossa Phantom 125?
How to Dismantle the Engine of the Ossa Phantom 125?
Phantom 125 To dismantle the engine of the Ossa Phantom 125, loosen the bolts securing the engine block to its housing. This will allow you to loosen the bolts f…

How to replace the exhaust on a Derbi Atlantis

Today, we will go through the instructions to remove and replace the exhaust on the Derbi Atlantis scooter in simple and quick steps. First, place the scooter on the centre stand and start unscrewing the screws of the exhaust terminal fixed to the rear frame; use a socket spanner with an extension, as shown in the video. At this point, if necessary, replace the exhaust manifold by removing the original; then install the new compatible and approved exhaust, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos