Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 108
    4. : Checks and maintenance

Peugeot 108 - Checks and maintenance

Checks And Maintenance Peugeot 108 (2014-2021 / mk 1)

Peugeot 108 (2014-2021 / MK 1)
How to Safely Lift the Peugeot 108
For this operation, you will need a hydraulic jack and two axle stands, along with rubber pads to protect the bodywork. Slide the jack under one of the front …Read all…
Posted on 12 May 2026 by ScegliAuto
Peugeot 108 (2014-2021 / MK 1)
How to replace the engine oil in the Peugeot 108
Today we will explain the steps to follow to replace the motor oil on a Peugeot 108 vehicle. The steps to follow to replace the motor oil are: - lift the …Read all…
Posted on 24 October 2024 by ScegliAuto
Peugeot 108 (2014-2021 / MK 1)
Where to find the chassis number of the Peugeot 108
In this video, we will see where to find the VIN (Vehicle Identification Number) of the Peugeot 108. This is the legal chassis number, stamped on the actual …Read all…
Posted on 9 September 2026 by ScegliAuto
Air conditioning (1) Battery (2) Transmission (1) Spark plugs (2) Body (1) Control unit (1) Key (7) Checks and maintenance (3) Dashboard (1) Headlight (1) Tail light (3) Fog lights (1) Air filter (2) Cabin air filter (2) Clutch (1) Light bulb (1) Headlight bulb (6) Tail light bulb (1) (2) Clock (3) Front bumper (1) Tires (1) Instrument cluster (2) Fuse box (5) (15) Tire pressure warning light (8) Service warning light (7) Fuel cap (1) Windshield wipers (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos