Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 108
    4. : Fuse box

Peugeot 108 - Fuse box

Peugeot 108 (2014-2021 / MK 1)
Where are the fuse boxes located on the Peugeot 108?
In this video we see where the fuse boxes are located on the Peugeot 108: the one in the passenger compartment is located in the lower part of the dashboard, …read all…
Posted on 3 October 2023 by ScegliAuto
Peugeot 108 (2014-2021 / MK 1)
Peugeot 108 fuse box
There are two fuse boxes on this car, the first is located in the passenger compartment to the left of the driver's side steering wheel near the driver's door, …read all…
Posted on 22 April 2023 by ScegliAuto
Peugeot 108 (2014-2021 / MK 1)
What is the Peugeot 108 fuse scheme?
In this video we can see the position of the fuse boxes, and the respective diagrams, in the Peugeot 108, to be consulted in case a device is malfunctioning …read all…
Posted on 9 August 2022 by ScegliAuto
Peugeot 108 (2014-2021 / MK 1)
Where are the fuses of the Peugeot 108 located?
The Peugeot 108 has two fuse boxes: the first is located inside the passenger compartment, at the bottom and slightly offset from the steering column. The box …read all…
Posted on 29 February 2024 by ScegliAuto
Battery (1) Gearbox (1) Key (5) Checks and maintenance (10) Headlight (1) Tail light (2) Cabin air filter (1) Headlight bulb (1) Rear light bulb (1) Front bumper (1) Tires (4) Instrument cluster (7) Fuse box (4) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos