Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse box and fuse positioning of the Peugeot 108

Model: Peugeot 108 MK 1 - Years 2014-2021
Part: Fuse box

Below we will see the instructions that will allow us to access the fuse boxes of the Peugeot 108, in simple and quick steps. First, we get on board the car and start by removing the plastic cover that we find at the bottom on the driver's side, under the steering wheel; instead, we find the external fuse box in the engine compartment, at the top, as shown in the video. At this point, we find inside the covers the scheme and the fuse diagram, also available in the vehicle's user manual; we replace any faulty fuses, always respecting the amperages.

Posted on 29 May 2025 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse diagram for the Peugeot 108?
Peugeot 108 (2014-2021 / MK 1) In this video, you can see the position of the fuse boxes and their respective diagrams in the Peugeot 108, to consult in case a device malfunctions …
Where are the Fuses in the Peugeot 108?
Where are the Fuses in the Peugeot 108?
Peugeot 108 (2014-2021 / MK 1) The Peugeot 108 has two fuse boxes: the first is located inside the cabin, low down and slightly offset from the steering column. The box will be acc…
Position and function of the air conditioning pressure sensor on the Peugeot 108
Position and function of the air conditioning pressure sensor on the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) The air conditioning pressure sensor, also known as a pressure switch, is a fundamental component in the air conditioning system of our Peugeot 108: …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos