Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the Fuses in the Peugeot 108?

Model: Peugeot 108 MK 1 - Years 2014-2021
Part: Fuse box

The Peugeot 108 has two fuse boxes: the first is located inside the cabin, low down and slightly offset from the steering column. The box will be accessible after removing its protective plastic cover; inside you will find the fuses for the windscreen wipers, cooling fan, etc. The second fuse box is located in the engine bay, directly under the windscreen. This will also be protected by a plastic cover that must be removed: inside you will find the fuses for the headlights, air conditioning, etc.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the Peugeot 108
How to replace the air filter of the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) To correctly replace the engine air filter of your Peugeot 108, it only takes a few minutes. All you have to do is carefully read the following guide…
How to replace the engine air filter of the Peugeot 108
How to replace the engine air filter of the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) The replacement of the engine air filter of your Peugeot 108 is undoubtedly one of the simplest operations you can perform independently on the vehic…
Fuse box and fuse positioning of the Peugeot 108
Fuse box and fuse positioning of the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) Below we will see the instructions that will allow us to access the fuse boxes of the Peugeot 108, in simple and quick steps. First, we get on board …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos