Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Cabin Air Filter on the Peugeot 108

Model: Peugeot 108 MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Cabin air filter

Video tutorial

On the Peugeot 108, the cabin air filter replacement occurs from inside the car, on the passenger side. After opening the door, work in the area under the dashboard, where you will find the small compartment that houses the filter.

The video shows the removal of the access cover, which is unlatched with a simple movement, without disassembling other panels. Once the compartment is open on the Peugeot 108, carefully slide out the used filter, noting the installation direction.

Immediately after, the new filter is shown, which is inserted into the same housing, respecting the correct orientation to ensure unobstructed airflow. Once the filter is in place, the cover on the Peugeot 108 is repositioned and closed until it clicks, restoring the area under the dashboard to its original state.


Posted on 23 August 2026 by ScegliAuto


Related tutorials

How to replace the engine air filter of the Peugeot 108
How to replace the engine air filter of the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) The replacement of the engine air filter of your Peugeot 108 is undoubtedly one of the simplest operations you can perform independently on the vehic…
How to replace the air filter of the Peugeot 108
How to replace the air filter of the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) To correctly replace the engine air filter of your Peugeot 108, it only takes a few minutes. All you have to do is carefully read the following guide…
How to Replace the Cabin Filter of the Peugeot 108
How to Replace the Cabin Filter of the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) If you want to replace the cabin air filter of your Peugeot 108 yourself, follow these steps. First, enter the car and reach the passenger seat. Open…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos