Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the Peugeot 108

Model: Peugeot 108 MK 1 - Years 2014-2021
Part: Checks and maintenance

Today we will explain the steps to follow to replace the motor oil on a Peugeot 108 vehicle. The steps to follow to replace the motor oil are: - lift the vehicle using the jack; - open the motor oil tank cap; - unscrew the oil pan nut and wait for the liquid to drain completely; - close the oil pan nut; - lower the vehicle back to the ground; - top up the liquid inside the tank; - close the tank cap; Once finished, start the engine to raise the RPM for a few minutes to test the vehicle's operation.

Posted on 24 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the Peugeot 108
How to replace the air filter of the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) To correctly replace the engine air filter of your Peugeot 108, it only takes a few minutes. All you have to do is carefully read the following guide…
How to replace the engine air filter of the Peugeot 108
How to replace the engine air filter of the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) The replacement of the engine air filter of your Peugeot 108 is undoubtedly one of the simplest operations you can perform independently on the vehic…
How to Reset the Oil Light on a Peugeot 108
How to Reset the Oil Light on a Peugeot 108
Peugeot 108 (2014-2021 / MK 1) If the orange oil light illuminates on the instrument cluster of your Peugeot 108 (2014-2021) and you want to reset it manually, follow these instruc…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos