Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil in the Peugeot 107

Model: Peugeot 107 MK 1 - Years 2005-2014
Part: Engine oil

The following video tutorial shows how to independently change the engine oil in a Peugeot 107 produced from 2005 to 2014. To perform the change, first open the front bonnet and unscrew the oil filler cap. Keeping the bonnet open, lift the vehicle on axle stands and place a plastic container under the oil sump to catch the used oil. It is very important to dispose of the engine oil following your local council's guidelines. Remove the oil sump bolt using a 19 mm socket spanner. Allow the oil to drain into the container. Once finished, close the bolt and lower the vehicle. Unscrew the oil filter cap using an oil filter removal tool. Clean the inside and after replacing the gasket, insert the new filter. Pour approximately 5 litres of engine oil into the oil reservoir.

Posted on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 107 (2005-2014 / MK 1) To correctly replace the engine air filter in your Peugeot 107, you only need a few minutes. Just follow the steps described in this guide. First, pu…
Peugeot 107 (2005-2014 / MK 1) If you want to replace the engine air filter of your Peugeot 107 on your own, just pay attention to the various steps described in the following guid…
Peugeot 107 (2005-2014 / MK 1) In this guide, we will go through the main steps on how to disassemble and replace the cabin fan motor of the Peugeot 107. First, we get inside the v…

Other guides you may be interested in

    Frequently Asked Questions

    • 107 2005-2014 - How many km to perform the first service of the Peugeot 107? Read answer

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos