Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Oil on Toyota Aygo

Model: Peugeot 107 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Engine oil

This video is currently unavailable

How do you change the engine oil on a Toyota Aygo? Let's see how to replace the oil and filter on a car similar to the 107 and C1. Lift the car on a column lift or jack, unscrew the oil sump bolt with a socket: allow the liquid to drain into a disposal container.

After draining the oil, screw the oil sump bolt back in. Once the oil has been removed from the engine, unscrew the filter located next to the oil sump using a chain wrench.

Lower the car and lift the bonnet, securing it. Top up the engine with the new oil recommended by the vehicle manufacturer.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

How to Adjust the Clutch Cable on the Peugeot 107 - Citroen C1 - Toyota Aygo
How to Adjust the Clutch Cable on the Peugeot 107 - Citroen C1 - Toyota Aygo
Peugeot 107 (2005-2014 / MK 1) In this guide, you will see how to correctly adjust the clutch cable on the Peugeot 107, as well as on its siblings, the Citroen C1 and Toyota Aygo. …
How to Replace the Internal Door Handle on Peugeot 107 - Citroen C1 - Toyota Aygo
How to Replace the Internal Door Handle on Peugeot 107 - Citroen C1 - Toyota Aygo
Peugeot 107 (2005-2014 / MK 1) The main steps today will show you how to remove and replace the internal door handle of the front door on the Peugeot 107, as well as the Citroen C1…
How to Replace the Window Seal on the Citroen C1 - Peugeot 107
How to Replace the Window Seal on the Citroen C1 - Peugeot 107
Peugeot 107 (2005-2014 / MK 1) This guide will show you how to remove and replace the front window seal on the Peugeot 107, as well as the Citroen C1 and Toyota Aygo. First, open t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos