Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Clutch Cable on the Peugeot 107 - Citroen C1 - Toyota Aygo

Model: Peugeot 107 MK 1 - Years 2005-2014
Part: Checks and maintenance

In this guide, you will see how to correctly adjust the clutch cable on the Peugeot 107, as well as on its siblings, the Citroen C1 and Toyota Aygo. First, open and lift the bonnet of your car and start by removing the battery along with the battery tray (removing the bracket); then locate the clutch cable and rotate (loosening or tightening) the cable adjuster to achieve the desired result. Check that after the adjustment, the clutch pedal does not have the typical initial play.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Clutch Pedal and Cable on Peugeot 107-Citroen C1
How to Adjust the Clutch Pedal and Cable on Peugeot 107-Citroen C1
Peugeot 107 (2005-2014 / MK 1) .. clutch cable, and consequently the pedal, on a Citroen C1 or Peugeot 107, following these simple instructions. First, open the bonnet of your car and.. …
How to replace the interior door handle of the Peugeot 107 - Citroen C1 - Toyota Aygo
How to replace the interior door handle of the Peugeot 107 - Citroen C1 - Toyota Aygo
Peugeot 107 (2005-2014 / MK 1) .. the front door of the Peugeot 107, as well as the Citroen C1 and the Toyota Aygo. First, we open the front door of the car and start removing the plastic.. …
How to replace the fuel pump of the Peugeot 107, Toyota Aygo, Citroen C1
How to replace the fuel pump of the Peugeot 107, Toyota Aygo, Citroen C1
Peugeot 107 (2005-2014 / MK 1) .. the fuel pump on a Peugeot 107, as well as on the Toyota Aygo and Citroen C1. On all three of these vehicles, we find the fuel pump under the rear seat,.. …

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos