Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery in a Peugeot 107?

Model: Peugeot 107 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Battery

Video tutorial

This tutorial shows how to replace the battery in a Peugeot 107. Open the front bonnet after releasing it by pulling the lever inside the cabin. You will find the battery on the right side.

Remove the battery terminals, starting with the negative one. Use a 10 mm socket to perform this operation. Next, take a 13 mm spanner and unscrew the bolts of the support plate, then remove it. Now you can extract the battery.

Handle the cables and terminals as indicated in the video, then insert the new battery into its place, securing all components in the order specified.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

…
How to Replace the Battery on a Peugeot 107
How to Replace the Battery on a Peugeot 107
Peugeot 107 (2005-2014 / MK 1) Today's information will guide you on how to check the operation and replace the battery on a Peugeot 107 in simple steps. First, open the bonnet and…
How to Replace the Key Battery on the Peugeot 107
How to Replace the Key Battery on the Peugeot 107
Peugeot 107 (2005-2014 / MK 1) If the smart key for your Peugeot 107 (2005-2014) has suddenly stopped working without any damage, it is likely that the internal battery has run out…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos