Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Internal Door Handle on Peugeot 107 - Citroen C1 - Toyota Aygo

Model: Peugeot 107 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Handle

Video tutorial

The main steps today will show you how to remove and replace the internal door handle of the front door on the Peugeot 107, as well as the Citroen C1 and Toyota Aygo. First, open the front door of the vehicle and start by removing the plastic cover of the handle by unscrewing the fixing screws located underneath; then disconnect the cable from the handle to remove it, as shown in the video.

At this point, replace and install the new door handle, finally refitting the plastic cover, following the video tutorial until the end!


Updated on 20 October 2026 by ScegliAuto


Related tutorials

How to Adjust the Clutch Cable on the Peugeot 107 - Citroen C1 - Toyota Aygo
How to Adjust the Clutch Cable on the Peugeot 107 - Citroen C1 - Toyota Aygo
Peugeot 107 (2005-2014 / MK 1) .. the Peugeot 107, as well as on its siblings, the Citroen C1 and Toyota Aygo. First, open and lift the bonnet of your car and start by removing the battery.. …
How to Replace the Window Seal on the Citroen C1 - Peugeot 107
How to Replace the Window Seal on the Citroen C1 - Peugeot 107
Peugeot 107 (2005-2014 / MK 1) .. window seal on the Peugeot 107, as well as the Citroen C1 and Toyota Aygo. First, open the front door and carefully pull out and remove the entire.. …
How to replace the fuel pump of the Peugeot 107, Toyota Aygo, Citroen C1
How to replace the fuel pump of the Peugeot 107, Toyota Aygo, Citroen C1
Peugeot 107 (2005-2014 / MK 1) .. the fuel pump on a Peugeot 107, as well as on the Toyota Aygo and Citroen C1. On all three of these vehicles, we find the fuel pump under the rear seat,.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos