Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Window Seal on the Citroen C1 - Peugeot 107

Model: Peugeot 107 MK 1 - Years 2005-2014

This guide will show you how to remove and replace the front window seal on the Peugeot 107, as well as the Citroen C1 and Toyota Aygo. First, open the front door and carefully pull out and remove the entire seal, preferably from the top downwards; then clean the seal's seating area of any dirt. At this point, insert the new seal from the bottom and secure it correctly on all sides; just follow the video to the end for reassembly!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Electric Window Fuse on the Peugeot 107?
Where is the Electric Window Fuse on the Peugeot 107?
Peugeot 107 (2005-2014 / MK 1) .. When the electric window motor on a Peugeot 107 starts to malfunction during opening and closing, the cause may lie in the failure of the.. …
Replacing the Headlight Bulb on a Peugeot 107 - Citroen C1
Replacing the Headlight Bulb on a Peugeot 107 - Citroen C1
Peugeot 107 (2005-2014 / MK 1) .. removing and replacing the headlight bulb on a Peugeot 107, as well as on a Citroen C1. First, open the bonnet and begin removing the plastic cover.. …
Guide to Dismantling the Centre Console of the Peugeot 107 - Citroen C1
Guide to Dismantling the Centre Console of the Peugeot 107 - Citroen C1
Peugeot 107 (2005-2014 / MK 1) .. dismantle and replace the centre console of the Peugeot 107 and Citroen C1. First, get in the vehicle and start by removing the two side plastics found.. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos