Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the clutch kit on the Citroen C1

Model: Peugeot 107 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Clutch

Video tutorial

Today's main instructions will show us how to dismantle and replace the clutch kit on the Peugeot 107, as well as on the Citroen C1 and Toyota Aygo. First, we lift the car and start by removing the front left wheel; then we disconnect the front half-shaft, unscrewing the fixing screws, as shown in the video.

At this point, we unscrew the clutch cover screws, also accessing it from the engine compartment (removing the battery); once the cover is removed, it will be possible to replace the clutch, installing the original one, following the video tutorial until the end!


Posted on 7 July 2025 by ScegliAuto


Related tutorials

How do you replace the clutch in the Peugeot 107?
How do you replace the clutch in the Peugeot 107?
Peugeot 107 (2005-2014 / MK 1) The difficulty in shifting gears, obviously leaves little doubt, it is due to wear of the clutch cable, or total wear of the clutch itself. If you wa…
Adjusting the Clutch Cable on Peugeot 107
Adjusting the Clutch Cable on Peugeot 107
Peugeot 107 (2005-2014 / MK 1) Over the years and especially with the mileage accumulated, a car's clutch cable can loosen, resulting in increased pedal travel. In today's video, y…
Where is the Clutch Cable Adjustment Wheel on the Peugeot 107?
Where is the Clutch Cable Adjustment Wheel on the Peugeot 107?
Peugeot 107 (2005-2014 / MK 1) In this video, see where the clutch cable adjustment wheel is located on the Peugeot 107. This also applies to the Citroen C1 and Toyota Aygo, which …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos