Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 107
    4. : Adjusting the clutch cable on a Peugeot 107

Peugeot 107 - Video tutorial

Model: Peugeot 107 MK 1 - Years 2005-2014
Part: Clutch
Operation: Adjusting the clutch cable on a Peugeot 107

Over the years and especially with the miles traveled, the clutch cable of a car can loosen, resulting in a greater pedal travel. In today's video, we are shown how to adjust this cable on a Peugeot 107. The clutch cable is located on a bracket on the gearbox, to adjust it you need to open the engine compartment and turn the clutch cable nut clockwise (indicated by the yellow arrow in the video). Turn the nut clockwise until the clutch pedal has reached the correct travel of about 3cm.


Posted on 3 May 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 107 2005-2014 - What to do if the clutch of the Peugeot 107 is not working? Read Answer
    • 107 2005-2014 - Why is the clutch of the Peugeot 107 not working? Read Answer
    • 107 2005-2014 - What causes clutch problems on the Peugeot 107? Read Answer
    • 107 2005-2014 - How much does it cost to replace the clutch of the Peugeot 107? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos