Do it yourself
Frequently asked questions about cars and motorcycles

How to Adjust the Clutch Pedal and Cable on Peugeot 107-Citroen C1

Model: Peugeot 107 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

Video tutorial

In this video tutorial, you will learn how to adjust the clutch cable, and consequently the pedal, on a Citroen C1 or Peugeot 107, following these simple instructions. First, open the bonnet of your car and locate the clutch cable; then find a screw upstream that is used to adjust the pedal travel and thus to set the clutch cable.

Now, based on the play of the pedal itself, unscrew or tighten the screw until the excessive play in the clutch pedal disappears; then follow the video tutorial to the end!


Updated on 6 April 2026 by ScegliAuto


Related tutorials

Peugeot 107 (2005-2014 / MK 1) .. the Peugeot 107, as well as on its siblings, the Citroen C1 and Toyota Aygo. First, open and lift the bonnet of your car and start by removing the battery.. …
Peugeot 107 (2005-2014 / MK 1) To adjust the clutch on a Peugeot 107, remove the panel located at the rear of the pedal assembly. This will allow you to access the clutch pedal mec…
Peugeot 107 (2005-2014 / MK 1) To adjust the clutch pedal on a Peugeot 107, you need to remove the panel located at the back of the pedal assembly. Once the panel is detached, you …

    Frequently Asked Questions

    • 107 2005-2014 - Where is the inertia switch on the Peugeot 107? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos