Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 107
    4. : How do you adjust the clutch pedal of the Peugeot 107?

Peugeot 107 - Video tutorial

Model: Peugeot 107 MK 1 - Years 2005-2014
Part: Clutch
Operation: How do you adjust the clutch pedal of the Peugeot 107?

In order to adjust the clutch pedal of the Peugeot 107, you need to remove the panel located at the back of the pedal assembly. Once the panel is removed, you will be able to locate the cable connected to the clutch actuator cylinder. On this cable, there is a nut that can be adjusted to make the pedal harder or softer: by tightening the nut, the pedal will become harder and have a shorter travel. Conversely, by loosening the nut, the travel will increase and the pedal will become softer. After making the adjustment, you can reattach the panel behind the pedal assembly.


Posted on 22 October 2023 by ScegliAuto

    Frequently Asked Questions

    • 107 2005-2014 - What to do if the clutch of the Peugeot 107 is not working? Read Answer
    • 107 2005-2014 - Why is the clutch of the Peugeot 107 not working? Read Answer
    • 107 2005-2014 - What causes clutch problems on the Peugeot 107? Read Answer
    • 107 2005-2014 - How much does it cost to replace the clutch of the Peugeot 107? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos