|
Do it yourself
| |||
| ||||
How to Replace the Engine Oil and Oil Filter in a Peugeot 107
Model: Peugeot 107
MK 1
- Years 2005-2014
In this tutorial, you can see how to replace the engine oil and oil filter in a Peugeot 107 by following some simple steps: lift the bonnet and secure it with the prop rod; unscrew the oil filler cap; raise the vehicle with a jack and place safety stands underneath. Position a container to collect the used oil under the oil drain plug; use a wire brush to clean the area around the drain hole. Using a 14mm spanner, unscrew the drain plug; let the oil flow out and wait for all the oil to drain into the container. Prepare another container for the oil filter. Use a multi-purpose cleaner to clean the oil filter. To unscrew the oil filter, use a ratchet with a 67-14 socket. Place the old filter in the container. Clean the filter seat with a multi-purpose cleaner; lubricate the rubber seal of the new filter with a bit of new oil. Screw the new filter into place, using a torque wrench to tighten to 23 Nm. Screw in the new oil drain plug with a 14mm socket (use the torque wrench up to 27 Nm). Lower the vehicle and top up the oil (5W-30, 3.6 litres) using a funnel, check the level with the dipstick, and add oil if necessary.
Updated on 18 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Peugeot 107
(2005-2014 /
MK 1)
The following video tutorial shows how to independently change the engine oil in a Peugeot 107 produced from 2005 to 2014. To perform the change, fir…
Peugeot 107
(2005-2014 /
MK 1)
How do you change the engine oil on a Toyota Aygo? Let's see how to replace the oil and filter on a car similar to the 107 and C1. Lift the car on a …
Peugeot 107
(2005-2014 /
MK 1)
This guide shows how to replace the engine air filter in a Peugeot 107. Open the car door, pull up the bonnet release lever located at the bottom lef…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.209
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |