Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 3008
  6. : Windscreen wipers

Peugeot 3008 - Windscreen wipers

Peugeot 3008 (2009-2016 / MK 1, T84)
How do you replace the windshield wiper blades of the Peugeot 3008?

The replacement of the windshield wiper blades on the Peugeot 3008 is done by lifting the wiper arms so that the blades are not in direct contact with the …read all…
Posted on 28 August 2023 by ScegliAuto
Peugeot 3008 (2009-2016 / MK 1, T84)
How do i replace the wiper blades on the Peugeot 3008?

In order to replace the wiper blades of the Peugeot 3008 you have to lift the arms so that the blades are not in direct contact with the windshield. Once they …read all…
Posted on 30 September 2022 by ScegliAuto

Airbags (4) Shock absorbers (1) Car stereo (11) Roof Rack Bars (2) Battery (16) Gearbox (2) Bodywork (2) Control unit (2) Key (17) Timing belt (6) V-belt (1) -board computer (19) Checks and maintenance (82) Dashboard (2) Headlight (4) Tail light (10) Air filter (10) Cabin air filter (28) Petrol filter (1) Diesel filter (3) Oil filter (1) Hand brake (1) Clutch (2) Accessory Kit (1) Light bulb (2) Side turn signal light bulb (3) Headlight bulb (13) Rear light bulb (3) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (1) Engine (2) Starter motor (1) Gear oil (1) Engine oil (1) Door panel (5) Windshield (1) Front bumper (3) Rear bumper (1) Brake pads (4) Hydraulic pistons (1) Tires (4) Gear Shift Knob (3) Door (2) Push button (2) Instrument cluster (14) Wheel (3) Fuse box (22) Outside rearview mirror (2) Interior rearview mirror (1) Windscreen wipers (2) EGR valve (1) Interior blower (5)

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos