Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter on the Peugeot Kisbee?

Model: Peugeot Kisbee
Part: Air filter

Video tutorial

To replace the air filter on the Peugeot Kisbee, loosen the screws securing the cover of the filter box, located near the rear wheel on the left side. Once the box is open, remove the filter inside and replace it with a new spare part.

After inserting the new filter, close the box by fitting the panel back in place, securing it with the appropriate screws and ensuring everything is functioning correctly.


Updated on 24 October 2026 by ScegliAuto


Related tutorials

How to Replace the Transmission on a Peugeot Kisbee
How to Replace the Transmission on a Peugeot Kisbee
Kisbee To replace the transmission on the Peugeot Kisbee, loosen the screws that secure the cover of the casing located on the left side of the scooter, jus…
How to Replace the Fuel Filter on the Peugeot Kisbee
How to Replace the Fuel Filter on the Peugeot Kisbee
Kisbee Today's instructions will show you the procedure for removing and replacing the fuel filter on the Peugeot Kisbee scooter. First, place the scooter o…
How to Remove the Variator Cover from a Peugeot Kisbee
How to Remove the Variator Cover from a Peugeot Kisbee
Kisbee Before starting, dismount from your Peugeot Kisbee, position it on its central stand, and if possible, lift it. The variator cover is secured in plac…

How to Change the Engine Oil on a BMW R1200T?

To change the engine oil on a BMW R1200T, follow these steps. Ensure the bike is on a level surface and the engine is warm but not too hot. Remove the oil filler cap and the oil drain plug, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew it to fully drain the used oil. Once drained, remove and replace the oil filter, ensuring to clean the mounting surface thoroughly. Install the new filter and screw the oil drain plug back in. Fill the engine with new oil through the filler cap until reaching the recommended amount, checking the level with the dipstick if necessary. Secure both caps tightly. Start the engine for a few minutes to circulate the new oil, then turn it off, and the replacement is complete.

Watch the video!


by ScegliAuto

More videos