Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Transmission on a Peugeot Kisbee

Model: Peugeot Kisbee
Part: Drivetrain

Video tutorial

To replace the transmission on the Peugeot Kisbee, loosen the screws that secure the cover of the casing located on the left side of the scooter, just below the air filter casing. By loosening the screws, you will be able to identify the variator and the clutch, along with the belt around them.

You can then loosen the central nuts of the variator and the clutch, allowing the belt to be removed, replacing all the relevant components. After replacement, install the new spare parts and check that everything functions correctly.


Updated on 25 August 2026 by ScegliAuto


Related tutorials

How to Replace the Transmission on a Peugeot Kisbee?
How to Replace the Transmission on a Peugeot Kisbee?
Kisbee To replace the transmission on a Peugeot Kisbee, loosen all the bolts securing the transmission cover located near the rear wheel on the left side of…
How do you replace the transmission of the Peugeot Kisbee?
How do you replace the transmission of the Peugeot Kisbee?
Kisbee In order to replace the transmission of the Peugeot Kisbee, you need to loosen the screws that secure the transmission cover: this cover is located n…
How to replace the crankshaft bearing on a Peugeot Kisbee?
How to replace the crankshaft bearing on a Peugeot Kisbee?
Kisbee To replace the crankshaft bearing on a Peugeot Kisbee, you need to completely disassemble the engine block and transmission, removing both components…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos