Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to disassemble the engine of the Peugeot Satelis RS 250, it will be necessary to loosen the screws that fix the block to its housing in the center of the frame: to do this, it will be necessary to loosen the screws that hold it in place so that the engine is released from the supports, cables, and manifolds. At this point, the screws fixing the cylinder to the top of the engine block will need to be loosened: then it will be possible to remove it together with the cylinder head to access the piston. The piston will need to be detached from the connecting rod to access the crankshaft and replace all necessary components.

Posted on 4 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the gearbox oil of the Peugeot Satelis 250
How to replace the gearbox oil of the Peugeot Satelis 250
Satelis 250 In this video tutorial we will see how to replace the transmission oil of the Peugeot Satelis 250 scooter, following the instructions below. First of…
How to Replace the Battery on a Peugeot Satelis 250
How to Replace the Battery on a Peugeot Satelis 250
Satelis 250 To replace the battery on the Peugeot Satelis 250, you need to open the under-seat compartment by loosening the screw located at the front. This will…
How do you replace the exhaust pipe of the Peugeot Satelis 250?
How do you replace the exhaust pipe of the Peugeot Satelis 250?
Satelis 250 In order to replace the exhaust on the Peugeot Satelis 250, you need to loosen the screws that secure the exhaust terminal to the corresponding suppo…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos